As professionals who specialise in the repair of home appliances, one of the questions that we are frequently asked is, "Why is my washing machine not spinning properly?" Every single day, the majority of us rely on our washing machine to clean our laundry, maintain the freshness of our garments, and keep them smelling and feeling clean.

To put this into perspective, when your washing machine begins to give you problems and eventually breaks down, it can throw a wrench into the works of your daily routine and make it more difficult to get things done. If you do not want to spend hours manually washing all of your dirty clothing, it is in your best interest to get your washing machine serviced as soon as possible. If you do not, that pile of dirty laundry will start to grow into a mountain in no time at all!

In our capacity as the most reputable Washing Machine Repair Dubai in the United Arab Emirates, it is reasonable to assert that we have repaired a considerable number of washing machines throughout the course of our existence. However, there is one issue that consistently arises, and that is a washing machine that has stopped spinning.

There are a variety of factors that could cause your washing machine to stop spinning, with some problems being simpler to resolve than others. Each and every individual element, from a heavy load to the motor burning out, will be discussed in detail so that you can determine the problem that is now occurring.

  strongly suggest that you get in touch with a local repair specialist who will be able to diagnose and identify the issue with your appliance if you are unclear about how to fix your washing machine that has stopped spinning or if you are not sure what the problem could be.

There are a few reasons why your washing machine is not spinning correctly.

Over the course of our more than three decades of experience as appliance repair specialists, ART WORKS LLC have encountered a significant number of issues with washing machines that result in the drum not spinning in the correct manner. Listed below are some of the most typical causes that we come across that result in your washing machine going without spinning:

The motor has completely burned out.

There is not enough space in the drum.

The load is not spread in an even manner.

You are using an excessive amount of detergent.

The switch on the lid is not functioning correctly.

Concerns have been raised regarding the drive belt.

The drain pump or the drain pipe is clogged.

No Spinning in the Washer? Ways to Fix It in a Professional Manner

The problem is generally related to the sort of mechanism that your washing machine utilises for the wash cycle or to rotating the tub or basket. If your washing machine is not spinning or is spinning too slowly, the problem is probably related to one of these. However, in rare instances, the result could be due to a malfunctioning door lock or lid switch.

It is possible that repairing the issue may need disassembling the washing machine; however, Washing Machine Repair Duabi is able to aid you in relying on professionals to resolve the issue without the need for a skilled technician.

Please ensure that the washing machine is disconnected from the power extension cord and that the water supply is turned off before you attempt to access it.

I was wondering what kind of washer you had.

Your washing machine may not be spinning for a variety of reasons, and these reasons may vary based on the model of washer that you own. One example of a common reason of non-spinning in top-load washers is a faulty lid switch. On the other hand, with front-load washers, the problem most frequently lies with door locks that are not functioning properly.

In addition, top-loading and front-loading washers feature distinct drive systems that are accountable for agitating and spinning the tub. These drive systems may consist of drive belts, motor couplers, or components of the stator and rotor.

When you are able to identify the exact problem and establish the proper solution, it is helpful to have knowledge of the type of washer that you have.

faulty door lock or lid switch with a defect

Both front-loading and top-loading washing machines come equipped with safety mechanisms that prevent the tub from spinning when the door or lid is open. These capabilities are the same. This is accomplished in top-load washers by use of a lid switch mechanism, however in front-load washers, the equivalent function is accomplished by means of a door lock, which is also referred to as an interlock.

It is possible to determine whether or not these safety mechanisms are functioning appropriately by closing the door or lid and listening for a clicking sound to ensure that it is secured securely. Observing the error codes that are produced by the washer is still another method for diagnosing the problem. These error codes can provide information regarding whether or not there is a problem with either of these aspects.

If you have reason to believe that the door lock or lid switch on the washing machine is malfunctioning, you should take it out of the machine and use a multimeter to check for continuity. Replacement of the controller or lock is required in the event that there is no continuity.

faulty motor coupler (defective)

Your washing machine may not be spinning properly because it contains a motor coupler, which is a device that transfers power from the motor to the gearbox. If this is the case, the motor coupler may be to blame. Although a faulty coupler may still permit the washer to agitate, it is unable to rotate the tub while it is in operation. Couplers for motors can become worn down over time, particularly if they have been subjected to excessive loads.

In most cases, the coupler is situated beneath the washing tub; in order to gain access to it, it may be necessary to tilt the washer or disassemble the appliance cabinet. For the coupler to be accessible, it is possible that the pump and motor will need to be removed.

After you have discovered the motor coupler, you should inspect it to see whether it has any symptoms of breaking. It will be necessary to replace the coupler in the event that it is found to be defective.

Relatively Poor Clutch

A number of top-loading washing machines come pre-fitted with either an external or an internal clutch that is located within the gearbox system. There is a possibility that the clutch will become defective if the clutch spring breaks or if the pads wear out.

Burning odours, loud noises during cycles, shavings beneath the Machine, and a scraping noise from the pads are all signs that the clutch is not functioning properly. Other symptoms include a bad spin switch speed that causes garments to become wet.

The clutch is normally attached to the basket drive assembly and can be found beneath the tub of the washing machine. In order to gain access to the clutch, it may be necessary to remove the drive motor and the gearbox. If the clutch is located within the gearbox, then the repair is more complicated and should be carried out by a technician who has received proper training.

Investigate the clutch for any indications of wear and tear or evidence of burning. Whenever the clutch is damaged to the point where it causes the machine to spin in an incorrect manner, it ought to be replaced.

In order to reach and replace the clutch, it may be necessary to disassemble the washing cabinet or to tip the machine onto its back, depending on the specific machine.

The Drive Belt Is Broken

If your washing machine is equipped with a drive belt that is used to turn the tub, drum, or basket, it may be necessary to repair it since the belt may have become loose or broken as a result of the passage of time. It's also possible that the belt has become detached from one of the pulleys that it wraps around.

In front-load washing machines that make use of a drive belt, the component that connects the drive motor to the basket is the belt. In the meantime, the drive motor and the gearbox are connected to one another by the belt on a top-load washing machine.

It may be necessary to remove the washer cabinet, the rear-access panel (and even the top panel), or even turn the machine over in order to have access to the drain hose and the belt that is located beneath it. This will depend on the model of washing machine that you have had.

You can remedy the issue by repositioning the belt on the pulley if it has become detached from the pulley. You are required to replace the belt, however, if it is broken, damaged, or does not have the required amount of tension.

Unsatisfactory Assembly of the Stator or Rotor

It is possible for certain top-load and front-load washing machines to generate a magnetic field through the use of a stator and rotor mechanism. This allows the laundry tub or basket to spin within the machine. On the other hand, the stator windings or rotor magnets may weaken over time, which will result in the Washer completely stopping to spin.

It may be essential to replace either the rotor or the stator drain pump, or both, in order to remedy the issue. This will depend on the nature of the problem as well as the type of washing machine that is being investigated.

To reach the stator and rotor of a front-load washing machine, it is customarily necessary to either remove the rear access panel of the washer or disassemble the front-load washer and cabinet.

On the other hand, in order to access the stator and rotor that are located underneath the tub, top-load washing machines may require the cabinet to be disassembled or the washer to be turned over.

Other Causes That Are Less Likely

In the event that the issues that were discussed previously are not the root cause of the problem with your washing machine, then the following components must to be inspected and replaced if it is discovered that they are not performing properly:

The motor that drives the vehicle

The board that controls the motor

The device known as the shifter, which is accountable for switching between the functions of the agitation and spin cycle modes

Rods, pads, or springs that are used for suspension

The component of the washer that is responsible for draining, which is the draining hose

It is the primary control centre.

What is the best way to fix a Whirlpool washer that is not spinning?

If your Whirlpool washer is not spinning, you can fix it by:

It is important to check the lid switch and ensure that it is operating correctly.

Carefully examine the drive belt for any indications of damage or wear.

Why does my washing machine make a buzzing sound but does not spin?

If a washing machine is humming but not spinning, the following are some possible causes:

In the drain pump or motor, there is an obstruction.

A faulty capacitor in the motor.

Final Thoughts

As a conclusion, you should now have a complete and comprehensive understanding of all the many reasons why your washing machine has stopped spinning. Not only are there certain problems that are very easy to resolve, but there are also those that do not require you to spend any money at all!

With that being said, there are certain problems with washing machines that will need your getting in touch with a local WASHING MACHINE REPAIR DUBAI specialist in order to receive assistance in resolving the issue at hand. Additionally, if you are unclear about what the problem could be with your washing machine and do not know why it is not spinning, it is advisable to contact a professional to come and take a look at it so that they can provide you with their diagnosis of the issue.

Please get in touch with a member of the team as soon as possible if you are a resident of the DUBAI area and are seeking for a washing machine repair service that is both inexpensive and effective. In the United Arab Emirates, ART WORKS LLC provide repairs on the same day or the following day, depending on availability. In order to get back to washing your dirty clothing in no time, you should get your washing machine repaired as soon as possible.